The advantages of anti-static raised floor in the computer room

In small and medium-sized computer rooms, in order to prevent static electricity from adversely affecting the equipment in the equipment room, you must consider installing and using anti-static raised floor. It offers the following advantages:


1. It simplifies installation and provides greater flexibility for future changes and expansion of device configuration.

2. The equipment in the equipment room can be freely connected through the anti-static floor, which facilitates laying and maintenance and makes the room clean and beautiful.

3. It can protect various cables, wires, data lines and sockets from damage.

4. The machine room can use the underfloor space as a static pressure air storage system for air conditioning to obtain satisfactory airflow organization. No matter where the computer equipment is installed, the air-conditioned air can be obtained through the air outlet of the anti-static raised floor.

5, is conducive to the bottom of the equipment maintenance and maintenance.

6. Eliminate the harm to the human body caused by cable exposure.

7. The adjustable nature of the anti-static raised floor can be used to eliminate the unevenness of the real floor and ensure the overall level of the floor of the room.

8, can make the static charge leak to the ground, and reflect the electromagnetic radiation.

Overshot Assembly

Overshot go into the heart of the drill pipe, the slider move up, make the tube socket head can be inserted into the center, when on the slider move up tight, using friction lift drill, remove loose again after the slider, by means of the connection string to slide along the block should tighten, set aside the center pipe, but in front of the salvage must first determine the bit in the bottom of the hole position, can be in a thin plate with bolts tight end of drill pipe, Drop the drill pipe to the bottom of the hole and press it on the drill bit. After waiting for a moment, it is proposed that the relative position of the drill bit at the bottom of the hole and the center of the rotary plate of the drill can be determined by observing the indentation left by the center pipe of the drill bit on the board, and then move the drill or rotary plate so that the center of the rotary plate is directly in front of the center pipe of the injured head, so as to ensure that the fishing device can be inserted into the center pipe accurately.

Overshot Assembly,Fishing Tools,Overshot Assembly For Sale,Overshot Fishing Assembly

WUXI XINZUAN GEOLOGICAL EQUIPMENT CO.,LTD. , https://www.wxsmrxz.com