To buy vegetables, you must first weigh two pounds. If you want to renovate a house, you must first measure the house. Do not underestimate the amount of room, its role can be great. Through the amount of room, you can better make the decoration budget. At the same time, it is also an important basis for designer decoration design. Therefore, the amount of housing must be taken seriously. Then, you must understand the process and skills of the room.
First, who needs a quantity room?
General decoration company will send professional designers to measure the room, this is the owner can follow to see, and the designer decided to decorate the style, put forward consulting questions, if there are close friends, pull them together, can provide many suggestions.
Second, the amount of room tools to what?
The professional designer's room is generally equipped with tools. If one person measures the room, soft aluminum tape measure, camera, drawing board, blank paper, pencil and carbon pen, and laser measuring instrument are required. In addition, we must also bring home layout plans, hydropower plans, and pipeline plans.
Third, where does the quantity room begin?
The quantity room generally starts from the entrance door, turns a circle, and finally returns to the other side of the entrance door to measure all the rooms in the house. If it is multi-layered, in order to avoid missed measurement, the measurement sequence must be measured after one layer and then measure another layer, and the order of the rooms should be from left to right.
IV. What are the precautions for quantity rooms?
1. Measure the height, width and height of each room's walls, the thickness of walls and beams, the height of doors and windows, the wall distance, and the height and width of equipment such as heating. The first step is to lay a solid foundation for design and decoration.
2. Inspect the key locations to check various pipes, heating, gas, floor drains, strong and weak boxes, and mark specific locations. Specifically, it should cover the position after the water pipes are installed, the wall distance from the toilet, the specific location of the floor drain, and the specific location of the heating.
3. Touch and observe the surface of the wall. The grassroots treatment of the original wall is directly related to the later construction projects and construction quality. Some of the original wall surface treatment is not in place, such as the original wall surface is not used water-resistant putty, if you directly brush latex paint, will cause the future wall flour, return alkali, peeling and other quality ills; In addition, such as kitchen and bathroom wall surface layer If the handling is not good or the surface strength of the wall is not good, the direct tiling will easily cause the emptying of the later tiles. The designer can judge the quality of the primary treatment by visual inspection, touching, tapping, and wall watering, and whether it is necessary. Reprocessing, but this link is often easily overlooked by designers and owners.
Volume room designer entrance door
This is an external LED emergency converter , it is suitable for external driver LED lamps . Wiring is easy to install and can be hidden in the ceiling . Using good quality aluminum shell cover the whole LED emergency power supply that speed up the heat dissipation . LED emergency module fitted with rechargeable lithium ion battery , it can supply electricity to lamps .
20W Emergency Battery Backup,Emergency Power Supply for Led Light,3.7V Emergency Led Converter
Jiangmen City Pengjiang District Qihui Lighting Electrical Appliances Co., Ltd , https://www.qihuilights.com