The successful setting of the program-controlled switch is the prerequisite for verifying its performance. Only through setting can it play its due role. Therefore, the following will tell you how to set up the program-controlled switch. How to set up the program-controlled switch through these methods.
Program-controlled switch setting method
The program-controlled switch settings are all programmed, while the program-controlled switches are all programmed to operate on the 8000 extension. Entering the correct code will have a confirmation tone, a beep. (If there is no 8000 extension, you can dial 129 to check the physical number, and 000 is the switchboard.)
First find the function header of the program-controlled switch. Since the factory function header is "1", you can use 125, 225, 325 to try to report the extension number. If 125 can report the extension number, your function header has not changed. If the manual changes all the "1" prefix to the corresponding function header.
Enter the programming state first on the 8000 switchboard: lift the machine to dial 18*, hang up. (You don't have to re-enter it in five minutes.) Note: If the prefix can change, the corresponding 18* will also change. For example, the function prefix is ​​3, which is 38* (note this!)
1. The extension number is edited (ie, the extension number is changed)
The code is: *11* physical number * wanted extension number#
The physical number can be dialed 129 for the query. The desired extension number cannot be the same as the number that the switch has.
2, extension level limit settings
Level 1 international and domestic, Level 2 domestic, Level 3 local calls and Local level 6 can only be internal calls
*10* Level* Extension #
3. Extension caller ID setting: *59*1*# *60*1*#
4, relay outside line setting
Opening the first line of the outside line TRK01: *44*1*01# Off: *44*0*01#
Opening the second line of the external line TRK02: *44*1*02# Off: *44*0*02#
Opening the third line of the TRK03: *44*1*03# Off: *44*0*03#
Opening Article 4 External Line TRK04: *44*1*04# Off: *44*0*04#
5, self-entry relay prompt voice settings:
*51*1065368 # Speak to the microphone after the beep. Audition: *51#, the first paragraph
*51*2065368 # Speak to the microphone after the beep. Audition: *51*2#, second paragraph
*51*3065368 # Speak to the microphone after the beep. Audition: *51*3#, third paragraph
6, into the relay mode selection settings
Manual transfer: *06*1* Relay number # Relay number: 01-04
Voice prompt: *06*0* Relay number # Relay number: 01-04
Group call mode: *06*2* Relay number # Relay number: 01-04
7, outside call mode selection settings
Outside line incoming manual transfer: *06*1* Relay number # Relay (outside line) Port number: 01-04 (48 or more 01-08)
Outside line incoming voice prompt: *06*0* Relay number # Relay (outside line) Port number: 01-04 (48 or more 01-08)
Outside call group call mode: *06*2* Relay number # Relay (outside line) port number: 01-04 (48 or more 01-08)
Description: The trunk number refers to the external port number.
Outside line incoming designated extension *12* extension number * outside line number (01-08)#
For example, the company has 3 external access switches (the external port of the access switch is 01-03), and the external call is required to be a computer voice prompt, and the check number is dialed to the designated 8008 extension.
Set the code:
*06*0*01#,*06*0*02#,*06*0*03#, (You can also set *06*0*01#02#03# continuously),
*12*8008*01#, (indicates that the first line outside the designated extension 8008 is 0 for the directory number)
*12*8008*02#, (ibid.)
*12*8008*03#, (ibid.)
8, power pass header setting *71 * A # A indicates the prefix to be set, the default is 1 (do not change no need to set)
There are many types of program-controlled switches. The above is just one of the types of program-controlled switch settings. All extensions of this type of telephone switch dial "125" for self-reporting numbers. The method is basically the same, with only a few individual settings being different.
When you purchase a PBX, you will be accompanied by a manual. Read the instructions in detail and follow the instructions to get the PBX settings.
Plant Light Bulbs with E27/E26/G14 socket, E27 is normal, E26 G14 customzied, lamp with full spectrum lighting, each lamp can cover 0.8-1.2 square meter.
We can make any grow bulb you wanted, special bulb MOQ 500pcs, we are manufacturer, can offer you Best Grow Lights with lowest price.
Led Grow Light Bulbs,Grow Light Led Light Bulbs
Horticultural Grow Bulb ,Led Grow Light Par,Indoor Grow Bulb,Indoor Plants Grow Bulb
Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.wygrows.com