How to maintain the swing gate?

Three-roll gates , swing gates and wing gates are used more and more frequently in our daily life. Different gates are used for different occasions. How to maintain three-roll gates, swing gates, and wing gates, as manufacturers are responsible and obligated Discuss with everyone.

The maintenance of the swing gate and the wing gate is basically the same as the maintenance of the triple roller gate, but the structural principles are different and the maintenance is somewhat different. The following points need attention:

I. Chassis maintenance and maintenance

The gate of the swing gate and the wing gate is sprayed or painted by No. 304 stainless steel and electrolytic plate (A3 plate). The stainless steel case has a rust spot for a long time. The chassis is wiped clean with sandpaper, green gauze and fossil powder, and the sanding surface is long. Wiping (protecting the direction of thick grain lines) will otherwise affect the appearance. The mirror surface will be polished with polishing wheels and polishing wax, and the conditional appearance will be coated with anti-rust oil. Spray, paint the chassis, use a soft cloth to wipe off the dust, the appearance of scratches with the same color paint to make up, do remember to not put the paint on the radio eye, once the cover with a pendulum, Gates and wing gates will be false alarms, causing unnecessary trouble.

II. Maintenance of the swing gate movement

Swing gate cut off power supply, open the cover, clean the surface dust, spray the drive part with butter, the swing switch needs to remove the motor, apply butter to the gear and wheel groove, according to the original position, the motor is fixed, check whether the screw of the coupling is There is looseness, tightening, limit switch and limit metal sheet do not easily adjust, the gap is not far from 1-2mm induction, too close to easy to damage.

Three. Swing gate power supply part maintenance

Swing gate cut off power supply, remove surface dust, check whether each plug is loose, plugged in, screwed tightly, do not arbitrarily replace the wiring position, whether the external power supply is exposed, timely bandage is good, whether there is leakage, timely processing, refer to the instructions, check each The technical parameters of the interface are normal, and the aging electronic components are replaced in time.

Above swing gate and wing gate maintenance must have professional maintenance, especially the movement and the electronic control part, first cut off the power supply, safe operation, have to undergo professional training, full understanding of the strong power and weaknesses in order to work posts.