| Home>Bearing knowledge>Bearing damage and countermeasures |
Bearing damage and countermeasures
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Usually; if the bearing is used correctly; can be used until the end of the fatigue life is stopped. But there will be accidental premature injury; the condition that is not used. This early damage; relative to the fatigue life; is called fault or incident The quality of the application of the limit. Due to the inconvenience of the device, the application, the lubrication; the foreign matter invading from the outside; the research on the thermal influence of the shaft and the outer casing is not sufficient.
The damage condition of the bearing is as follows: the ferrule of the roller bearing and the shank of the rib; the reason can be considered; the lack of lubricant, the unsuitability, the disadvantage of the oil supply structure, the intrusion of foreign matter, the bearing device error, the shaft deflection The song is too big; there will be coincidences.
Therefore; only the bearing damage is inquired; it is difficult to know the true cause of the damage. However, if the bearing is used, the operating conditions, the structure around the bearing, and the condition before and after the attack are known; the damage condition of the bearing and several causes are investigated. Can avoid similar attacks.
Recommend to friends comments close window
| Bearing related knowledge |
| After the NTN bearing work, the analysis of the problem of the jaw crusher bearing problem is solved by the use of the rolling bearing process of the double row angular touch ball bearing. |
This article links to http://
Please indicate the bearing network http://
Previous:Rail-loading machine for railway bearings Next: Oil film bearing to avoid mixing oil and its low torque smooth grease seal
Hook and loop sanding disc is also a classification of round sanding disc, it is also called self-adhesive sandpaper, which can be glued to the sanding disc tray and very convenient to use
Compared with Abrasive Fiber Disc , round disc hook and loop also can be a kind of Quick Change Disc , which is more convenient and cost-effective.
We use the high quality sandpaper rolls and total automatic Abrasive Sanding Disc punching machine, so the production ability is very enough and has ready stock.
Round sandpaper has the advantages of anti-clogging, anti-static, good flexibility, and high wear resistance.
Due to its wide range of uses, there are also many varieties of hook and loop sanding disc. The most commonly used are red sanding disc, yellow/gold sanding disc, green sanding disc, and white sanding disc, etc.
The sandpaper disc is using aluminum oxid abrasives, with grits as below: 40#, 60#, 80#, 120#, 180#, 240#, 320#, 400#, 600#, 800#, 1000#, 1200#, 1500#, 2000#.
The abrasive polishing disc can be punched into various shapes, round, round with holes, triangle, rectangle, iron shape, neckline shape, etc.
This product is round abrasive disc size: 100mm, 125mm, 150mm, 180mm, 225mm or other size can be customized.
The holes best selling is with 6 hole, 8 holes, 15 holes, 17 holes or customized.
We can also supply Abrasive Flap Disc , Flap Disc Backing Pad , Flap Disc Adhesive Glue, Flap Wheels , Abrasive Machine (Flap Disc Making Machine, Abrasive Belt Making Machine, Sanding Disc Machine , Flap Wheel Machine ), Cotton Buffing Wheels , Nylon/non-woven Surface Conditioning Products, Cutting Wheels , Grinding Wheels etc. If you are interested please feel free to contact us.
Hook And Loop Sanding Disc,5inch 8 hole sanding disc,Abrasive Sand Disc,Alumina Sanding Disc,Angle Grinder Sanding Disc
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jiadingabrasive.com