Xiaobian knows that many of our people's home walls will have some moldy appearances. How do you deal with the molds on the walls ? Do you have to worry about it? How do we deal with the mold on the wall, and how to deal with the mold on the wall? I don’t know how to deal with it. What is the cause of the mold on our walls?
First, how to handle the mold on the wall
1. Bleaching water (powder) and water are poured into the water spray bottle at a ratio of 1:99. Spraying on the moldy wall can immediately solve the problem of moldy wall. Wipe the wall with a rag; wash it with water, and dry it with anti-mold paint to prevent moisture for a long time. In addition, there is a household convenient waterproofing repairing agent on the market, which can be sprayed on the floor of the leaking wall like the insecticide, and it is very convenient to operate.
2. If the mold is not too serious, it is enough to wash the wall with 80% alcohol. Pay attention to ventilation when cleaning, wear protective gloves, masks and glasses. In order to avoid mold again, care should be taken to dry the wall thoroughly, to eliminate the cause of mold and to properly heat and ventilate.
3, when the discovery of mildew, you can first use the green Thai wall mold removal agent spray, after the mildew treatment is clean, air dry, the next day you can use antibacterial mildew agent to brush again. For large areas of mildew, the mildew on the ceiling can be treated with a paint roller or a sponge wiper to remove the mold remover.
4, in order to prevent the wall from mildew, it is best to recommend that you always maintain a clean and tidy environment in the ventilation room, so that the indoor wall will not be mildewed, it is not necessary to worry about it.
5, in order to prevent the wall from being moldy, you can brush a layer of waterproof paint, latex paint, etc. on the wall, so that you can do it once and for all, then you don't have to worry about this problem.
Second, the wall mold cause
1. Of course, the temperature difference between indoor and outdoor is relatively large, and it is easy to make the wall “condensedâ€. If it is not dried for a long time, mildew and long hair will occur, and the wall will be moldy. Everyone knows that mold is a strange mold. The terminology of mold in our paint industry is called wall cancer. I think how much harm this is. Mold is very stubborn, the general method is inexhaustible, it will be long in a few days, and it will become bigger and bigger. There are many reasons for the mold on the wall, the wall is damp, or the putty or paint used in the decoration is not good, and the wall will be moldy.
2, the exterior wall brick is not inlaid, the brick joint is not full or the seam is used; the outer wall is not full, the sand hole and the gap are formed, and the cold and hot bridge is formed; the wall and the beam and column joint are not densely filled and cracks are generated. When the doors and windows are installed, the foaming filling is not dense and there are gaps. There is also a crack in the external wall, which is also the cause of the wet and long hair on the inner wall.
3, the outside wall insulation measures are not enough, causing the wall to be cold, resulting in the wall is cold, indoor water vapor will form water droplets on the wall, the wall will be moldy and long hair when wet.
4, to prevent mold on the wall, in the decoration can be applied to the wall surface with anti-seepage liquid, so that the wall surface is formed into a colorless transparent waterproof film layer to prevent the infiltration of external moisture.
5, usually when we live, if you do not pay attention to ventilation, then the indoor humidity will be too large, the wall will be easy to wet, resulting in the phenomenon of mold on the wall. In addition, the summer time in the south is long, the air humidity is high, and the air in the coastal area is humid. Therefore, in the southern rainy season, the wall surface is prone to mold.
The content of the article we read is the moldy effect of our wall. How have you seen these walls? How do you deal with the molds? Do you think it can help you? The reason why our walls are moldy is that there are some main ones. The reason is that I hope that my friends will take more precautions. There are still a lot of decoration information in our decoration home network. My friends will continue to pay attention to thank you for reading.
More related wonderful reading:
How do you deal with the mold on the wall? How to prevent mold on the wall?
2 tier Cooling Rack,3 tier Cooling Rack,Foldable Cooling Rack,Creative Cooling Rack
Shenzhen Lanejoy Technology Co.,LTD , https://www.szcoolingrack.com