Model NO.: API 5CT J55, K55, V50, L80, N80
Od: 139.7 - 339.7 mm
Wall Thickness: 6.2 - 13.06 mm
Range: R1,R2,R3
Surface: Black, Copper Coated,Shot Blasting
Yield Strength: 862
Tensile Strength: 931
Elongation: 13
Inspection: with Hydraulic Testing, Flux Leakage NDT, Ut Test
Ends: Plain or Beveled
Type of Thread: Buttress Thread, Short Round Thread, Long Round
Trademark: YCT
Transport Package: Standard Sea Worthy Packaging
Specification: APISPEC5CT PDVSA
Origin: China
HS Code: 7304229000
Model NO.: API 5CT J55, K55, V50, L80, N80
Od: 139.7 - 339.7 mm
Wall Thickness: 6.2 - 13.06 mm
Range: R1,R2,R3
Surface: Black, Copper Coated,Shot Blasting
Yield Strength: 862
Tensile Strength: 931
Elongation: 13
Inspection: with Hydraulic Testing, Flux Leakage NDT, Ut Test
Ends: Plain or Beveled
Type of Thread: Buttress Thread, Short Round Thread, Long Round
Trademark: YCT
Transport Package: Standard Sea Worthy Packaging
Specification: APISPEC5CT PDVSA
Origin: China
HS Code: 7304229000
Small diameter alloy steel oil casing pipe 1.Base Information
|
Standard |
APIÂ 5L |
||
|
Grade (Â Material) |
PSL-1 |
API 5L - Gr.B/X42/X46/X52/X60/X70Â etc. ISO3183 - L245/L290/L320/L360/L415/L485 etc. |
|
|
PSL-2 | |||
|
Minimum Order Quantity |
1ton |
||
|
           Outside Diameter Ranges |
1/8''~48''  Or  DN6~DN1200  Or  10.3mm~1219mm |
||
|
           Wall Thickness Ranges |
SCH10~SCH160  Or  STD,XS,XXS  Or  1.73mm~59.54mm |
||
|
Length (negotiable) |
For 20Ft Container |
4.8m-5.8m |
|
|
For 40Ft Container |
            4.8m-12m |
||
|
        Most common choice |
            6m, 12m |
||
|
Type |
Welded |
All normal sizes |
|
|
Seamless | |||
|
Cap (negotiable) |
Pipe size should under DN600 |
||
|
Pipe End |
Plain end |
All sizes |
|
|
Bevel end |
Pipe size above DN50, and the thickness should greater than 3.2mm |
||
|
Our advantages |
·Diverse products(Steel pipes, pipe fittings, other fittings) ·Any third party inspection is accepted by we company. ·Quick response in quotation,delivery,after-service. ·Focus on pipe & tube solution for project application. |
||
2.Mechanical properties
| Grade | Yield strength(MPA) | Tehsile strength(MPA) | Hardness(MAX) | |||
| Â | min | max | min | HRC | HBW | |
| J55 | 379 | 552 | 517 | Â | Â | |
| K55 | 379 | 552 | 655 | Â | Â | |
| N80 | 552 | 758 | 689 | Â | Â | |
| M65 | 448 | 586 | 586 | 22 | 235 | |
| L80 | 552 | 655 | 655 | 23 | 241 | |
| C90 | 621 | 724 | 689 | 25.4 | 255 | |
| T95 | 655 | 758 | 724 | 25.4 | 255 | |
| P110 | 758 | 965 | 862 | Â | Â | |
| Q125 | 862 | 1034 | 931 | Â | Â | |
| R95 | 655 | 758 | 724 | Â | Â | |
| C110 | 758 | 828 | 793 | 30 | 286 Â |
|
3.Available Size
|
                                                          API Oil Casing Pipe            | ||||||
|
Outer Diameter |
Wall   Thickness |
Grade |
Thread |
Length |
||
|
in |
mm |
kg/m |
lb/ft |
|||
|
4 1/2" |
114.3 |
14.14-22.47 |
9.50-15.10 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
5" |
127 |
17.11-35.86 |
11.50-24.10 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
5 1/2" |
139.7 |
20.83-34.23 |
14.00-23.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
6 5/8" |
168.28 |
29.76-35.72 |
20.00-24.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
7" |
177.8 |
25.30-56.55 |
17.00-38.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
7 5/8" |
193.68 |
35.72-63.69 |
24.00-42.80 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
8 5/8" |
219.08 |
35.72-72.92 |
24.00-49.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
9 5/8" |
244.48 |
48.07-86.91 |
32.30-58.40 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
10 3/4" |
273.05 |
48.73-97.77 |
32.75-65.70 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
11 3/4" |
298.45 |
62.50-89.29 |
42.00-60.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
13 3/8" |
339.72 |
71.43-107.15 |
48.00-72.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
4.Package
| 1. Â Bundle packing. |
| 2.  Bevelled end or plain end or warnished as per buyer's  requestments. |
| 3. Â Marking: as per customer's requests. |
| 4. Â Painting varnish coating on the pipe. |
| 5. Â Plastic caps at ends. |
5.Trading Information
| Trade terms: | FOB,CIF,CFR,EXW |
| Payment terms: | 1.L/C at sight 2.L/C 60/90 days 3.T/T 30% deposit and balance paid after goods are produced and before on board. 4.T/T 30% deposit and balance paid upon receipt of B/L copy 5.T/T 30% deposit and balance paid by L/C at sight. 6.T/T 30% deposit and balance paid by L/C 60/90 days |
| MOQ | 1ton |
| FOB price | USD450-1000/Ton FOB Tianjin |
| Sample time | 5 days |
| Lead time: | 15-35 days |
| Shipment: | by sea |
| Supply capability: | 5000 Tons |
| Sample availability | Yes |
| Packing Information: | plastic film inside and woven bag or hession cloth outside.25kg/50kg each coil,25ton/20'FCL(alsoaccording customer's requirment ). |
6.Our Products
7.Our Warehouse
8. Afer-sales Service
1). Upon products arrival we always phone or email to check feedback on received goods.
2). If goods have been damaged during shipment we will try to obtain as much evidence as possible to support any claim you wish to make to the insurance company.
3). Keep you constantly up-to-date about market trends in China so you know when it is the right time to buy
Â
9.Contact
Sindy
| TEL | 0086-22-60769858 |
Â
Â
 Small diameter alloy steel oil casing pipeÂ
1.Base Information
|
Standard |
APIÂ 5L |
||
|
Grade (Â Material) |
PSL-1 |
API 5L - Gr.B/X42/X46/X52/X60/X70Â etc. ISO3183 - L245/L290/L320/L360/L415/L485 etc. |
|
|
PSL-2 | |||
|
Minimum Order Quantity |
1ton |
||
|
           Outside Diameter Ranges |
1/8''~48''  Or  DN6~DN1200  Or  10.3mm~1219mm |
||
|
           Wall Thickness Ranges |
SCH10~SCH160  Or  STD,XS,XXS  Or  1.73mm~59.54mm |
||
|
Length (negotiable) |
For 20Ft Container |
4.8m-5.8m |
|
|
For 40Ft Container |
            4.8m-12m |
||
|
        Most common choice |
            6m, 12m |
||
|
Type |
Welded |
All normal sizes |
|
|
Seamless | |||
|
Cap (negotiable) |
Pipe size should under DN600 |
||
|
Pipe End |
Plain end |
All sizes |
|
|
Bevel end |
Pipe size above DN50, and the thickness should greater than 3.2mm |
||
|
Our advantages |
·Diverse products(Steel pipes, pipe fittings, other fittings) ·Any third party inspection is accepted by we company. ·Quick response in quotation,delivery,after-service. ·Focus on pipe & tube solution for project application. |
||
2.Mechanical properties
| Grade | Yield strength(MPA) | Tehsile strength(MPA) | Hardness(MAX) | |||
| Â | min | max | min | HRC | HBW | |
| J55 | 379 | 552 | 517 | Â | Â | |
| K55 | 379 | 552 | 655 | Â | Â | |
| N80 | 552 | 758 | 689 | Â | Â | |
| M65 | 448 | 586 | 586 | 22 | 235 | |
| L80 | 552 | 655 | 655 | 23 | 241 | |
| C90 | 621 | 724 | 689 | 25.4 | 255 | |
| T95 | 655 | 758 | 724 | 25.4 | 255 | |
| P110 | 758 | 965 | 862 | Â | Â | |
| Q125 | 862 | 1034 | 931 | Â | Â | |
| R95 | 655 | 758 | 724 | Â | Â | |
| C110 | 758 | 828 | 793 | 30 | 286 Â |
|
3.Available Size
|
                                                          API Oil Casing Pipe            | ||||||
|
Outer Diameter |
Wall   Thickness |
Grade |
Thread |
Length |
||
|
in |
mm |
kg/m |
lb/ft |
|||
|
4 1/2" |
114.3 |
14.14-22.47 |
9.50-15.10 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
5" |
127 |
17.11-35.86 |
11.50-24.10 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
5 1/2" |
139.7 |
20.83-34.23 |
14.00-23.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
6 5/8" |
168.28 |
29.76-35.72 |
20.00-24.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
7" |
177.8 |
25.30-56.55 |
17.00-38.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
7 5/8" |
193.68 |
35.72-63.69 |
24.00-42.80 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
8 5/8" |
219.08 |
35.72-72.92 |
24.00-49.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
9 5/8" |
244.48 |
48.07-86.91 |
32.30-58.40 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
10 3/4" |
273.05 |
48.73-97.77 |
32.75-65.70 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
11 3/4" |
298.45 |
62.50-89.29 |
42.00-60.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
|
13 3/8" |
339.72 |
71.43-107.15 |
48.00-72.00 |
J55/N80/P110/K55 |
LTC/STC/BTC |
R1/R2/R3 |
4.Package
| 1. Â Bundle packing. |
| 2.  Bevelled end or plain end or warnished as per buyer's  requestments. |
| 3. Â Marking: as per customer's requests. |
| 4. Â Painting varnish coating on the pipe. |
| 5. Â Plastic caps at ends. |
5.Trading Information
| Trade terms: | FOB,CIF,CFR,EXW |
| Payment terms: | 1.L/C at sight 2.L/C 60/90 days 3.T/T 30% deposit and balance paid after goods are produced and before on board. 4.T/T 30% deposit and balance paid upon receipt of B/L copy 5.T/T 30% deposit and balance paid by L/C at sight. 6.T/T 30% deposit and balance paid by L/C 60/90 days |
| MOQ | 1ton |
| FOB price | USD450-1000/Ton FOB Tianjin |
| Sample time | 5 days |
| Lead time: | 15-35 days |
| Shipment: | by sea |
| Supply capability: | 5000 Tons |
| Sample availability | Yes |
| Packing Information: | plastic film inside and woven bag or hession cloth outside.25kg/50kg each coil,25ton/20'FCL(alsoaccording customer's requirment ). |
6.Our Products
7.Our Warehouse
8. Afer-sales Service
1). Upon products arrival we always phone or email to check feedback on received goods.
2). If goods have been damaged during shipment we will try to obtain as much evidence as possible to support any claim you wish to make to the insurance company.
3). Keep you constantly up-to-date about market trends in China so you know when it is the right time to buy
Â
9.Contact
Sindy
| TEL | 0086-22-60769858 |
Â
Â
Â
Our LED Emergency Twin Spot Lights are a cost effective replacement for old fashioned halogen emergency twin spot fittings. Due to the low power consumption of the LED lamps, only one battery is required, reducing option during charging. The super bright adjustable heads make this twin spot ideal for commercial and industrial applications. with a self test feature every 90 days to ensure correct operation. The Led Emergency Lights design makes it quick and simple to install.
Twin Spot Emergency Light,Emergency Twin Spot,Led Twin Spot Emergency Lights,Led Emergency Twin Spot Light
Foshan Nai An Lighting Electric Co.,ltd , https://www.naipslighting.com