In recent years, the whole wardrobe has gradually become popular in the decoration market. As a wardrobe net, its plate has become the focus of people's attention. In the overall wardrobe design, the overall wardrobe plate what choices ? Ou Yifeng furniture to teach you the whole wardrobe plate purchase .
Wood board
Wood board, commonly known as the big core board, is a plywood with a solid wood core. The core board has a high flexural strength and a relatively low flexural strength. Most of the current market is solid, rubberized, double-sided sanding, five-layer blockboard, is one of the most commonly used plates in the current decoration.
This kind of plate has good screw holding strength, high strength, quality, sound absorption, heat insulation and other characteristics, moisture content is not high, between 10% -13%, processing is simple, the most widely used. Due to the large amount of urea-formaldehyde glue used in wood board production, formaldehyde emission is generally high and environmental protection is not good.
Particle board
Particleboard is the process of cutting all kinds of shoots, trails, fast-growing wood, sawdust and other materials into pieces of certain specifications. After drying, it is mixed with rubber, hardener, waterproof agent, etc., and pressed at a certain temperature and pressure. A type of wood-based panel, which has a honeycomb-like profile, is called a particle board.
The surface of the particle board is smooth, the texture is vivid, the unit weight is uniform, the pollution resistance, the anti-aging are more beautiful, the paint and various veneers can be performed, and the sound-absorbing, sound-insulating and heat-insulating effects are good, and the moisture-proof performance is strong. The use of glue in production is small and the environmental protection is good.
Wood particle board
The so-called solid wood particle board, in fact, is produced by the process of particleboard, is a type of particleboard, also known as oriented structure particleboard, is a small diameter material, thinning material, wood core, board skin, branches and other materials as raw materials, Through the special equipment processing into different sizes of flaky pieces, after drying, sizing, and special equipment, the core layer flanking sheet is laid diagonally and directionally, and then a hot-pressed artificial board.
After this type of sheet is dried by an advanced single-channel dryer, the coefficient of expansion is small, and the moisture resistance is very good. The fins are oriented with layered pavement, so its internal internal texture is even, more than ordinary particleboard and powder The density plate holds nail force, bending pressure resistance, and stability. Such plates are widely used by European and American furniture manufacturers as high-grade and environmentally friendly substrates.
Fibreboard
Fiberboard, also known as the density board, is based on plant fibers as the main raw material, and is made by hot grinding, sizing, paving, hot pressing and other processes. Fibreboards have density, with low density board fibreboards below 450kg/m3, medium density fibreboards between 450 and 880 kg/m3, and hard fibreboards above 880 kg/m3.
This plate retains the original fiber and is pressed at high temperature. The surface is flat, the material is fine, and the stability is good. It can be easily shaped and milled. The strength and hardness are better than the particle board, but it is not resistant to water blisters and is blistered. The amount of swelling is about 2mm on one side, so the density board is more suitable for a relatively dry environment such as a closet. In addition, fiberboard production with a larger amount of plastic, slightly less environmental protection, European furniture should be less recommended.
Solid wood finger board
Fingerboards, also known as integrated boards, glulam, finger joints, and spliced ​​panels of deep-processed pieces of solid wood, are used as saw-tooth-like interfaces between boards, similar to two-handed finger-to-finger joints. . Since the raw wood strips are cross-linked, such a combined structure has a certain binding force, and since there is no need to stick the surface plate up and down, the glue used is extremely small.
Due to the less joints of solid wood panels, the amount of glue used is also less, relatively environmentally friendly, easy to process, and can be cut, drilled, sawed and formed, but the solid fingerboard is easily deformed and cracked. The quality of the solid wood fingerboard is guaranteed, but the cost is high.
Multi-layer solid wood board
The multi-layer solid wood board is made of multi-layer plywood arranged in a criss-cross pattern, and the surface is made of high-quality solid wood veneer or technical wood as a fabric, and is manufactured through several processes such as cold pressing, hot pressing, sanding, and health care. Because the multi-layer solid wood panel is not easy to be deformed and can automatically adjust the indoor temperature and humidity, the surface layer wood veneer material has natural real wood texture and feel, so the selectivity is stronger. Therefore, it is greatly favored by consumers.
Multi-layer solid wood panels have good structural stability and are not easily deformed. Due to the vertical and horizontal gluing, high temperature and high pressure, the deformation of the solid wood plate is solved in terms of internal stress. In the production process, the use of self-made high-quality environmental protection rubber, so that the product's formaldehyde release limit to meet the national standards, green environmental protection.
Whole wardrobe plate purchase
Look for environmentally friendly plates
Professional custom wardrobe manufacturers choose environmentally friendly plates that meet the national testing standards. Some manufacturers use inferior plates that do not have test reports and pose a potential threat to human health. Therefore, to buy a custom closet, you should first look at the company's plate inspection report and related inspection certificate issued by the national authority inspection department.
Plate veneer to see the quality
Some wardrobes look good on the surface, however, with a light stroke on the nails, you can draw obvious scratches. These custom wardrobes are made of surface-ply paper, ornate paper plates, which are frequently used in the low-cost wardrobes on the market, and have poor wear resistance. Professional custom wardrobe manufacturers generally use the thicker immersion paint and high temperature and pressure treatment of environmental protection melamine plywood, high surface strength, abrasion resistance and scratch resistance.
Work on the plate edge
Professional custom closet manufacturers use precision panel saws to cut the plates, and there is no chipping around the plates. After being sealed on all sides, water in the air is effectively prevented from invading the interior of the board. Some manufacturers do not have professional equipment, rough cutting, there are significant collapse around. Some even cut corners, only doing one side of the front edge of the plate. The non-sealing surface easily absorbs moisture in the air, causing the panel to expand, causing the wardrobe to deform, affecting the service life.
What are the choices for the whole wardrobe plate ? Do not just use plates that are not up to the standard, which will cause a lot of trouble for the future. If you want to learn more about furniture, you can pay attention to GO Home Information Channel.
Naips carries a large selection of Emergency Exit Sign Light for your option. Patterns can be customized and replace.
Emergency Exit Light,Led Exit Signs,Neon Exit Sign,Emergency Exit Sign Light
Foshan Nai An Lighting Electric Co.,ltd , https://www.naipsled.com