In the environment we live in today, the pollution of the environment is getting more and more serious. Therefore, people pay attention to the importance of environmental protection on the other side. The decoration materials have also been changed. The new decoration materials have gradually been invented. Come out, then what are the new materials and what are their characteristics? Let me briefly introduce the types and characteristics of the new materials for decoration .
One: What are the new materials for decoration?
1: liquid wallpaper, 2: antique glazed light roof tile, 3: waterless plaster, 4: soft stone floor, 5: lightweight dry hanging exterior wall insulation system, 6: alternative to color steel plate, 7: New decorative coatings.
Two: What are the material characteristics of the new decoration materials?
1: The production of raw materials from a wider range of sources is less restrictive, mainly using sawdust, straw rice husks and some agricultural machinery added to inorganic materials through special processing, production investment is small, cost and price is low, effective fast.
2: The process at the time of production is relatively simple, the degree of automation of the equipment is high, the manual use is small, the production uses the assembly line operation, and there is no noise and three wastes in the production process.
3: The energy consumption for production is very low, no high temperature, high pressure is needed, and the heat is released by means of chemical reaction, so as to meet the requirements of the production process.
4: It has high environmental protection, and the pollution index is very low. It has high utilization value for the development of modern society.
Three: the advantages of decoration and new materials
1: It has good earthquake resistance. Whether you are building a high-rise building or a normal house construction, it can be used in a steel frame structure, and its performance is quite good.
2: It has the characteristics of convenient construction. The installation used is basically plate installation, so the construction is very convenient.
3: The cost of production is very low, the materials used are basically agricultural and industrial waste, and the production cost is very low.
4: Energy saving and environmental protection, no high temperature and high pressure treatment is required in the production process, and the products produced are non-toxic, harmless, free of radioactive materials and non-polluting, so it is very environmentally friendly.
5: Increase the use area: Under the same conditions of heat preservation and sound insulation, the plate is thinner and the same building, which can increase the use area by more than 10%. It has good fireproof, waterproof, impact resistant and anti-aging advantages.
Four: What are the characteristics of the new decoration materials introduced above?
1: Antique glazed lightweight roof, can be free of waterproof layer, has good waterproofness, fireproof and waterproof performance is also good, sound insulation performance is good, color is rich, and stability is good.
2: Lightweight dry-hanging external wall insulation decorative hanging board, suitable for all kinds of base wall, easy to install, not affected by climate during construction, with good insulation, waterproof and decorative features.
3: Liquid wallpaper, liquid wallpaper is a water-based paint, liquid wallpaper is as strong as traditional paint, and has good moisture and antibacterial properties, is not easy to insects, and is not easy to age.
4: Water-free plastering plaster is a kind of high-efficiency, energy-saving, green and environmentally-friendly building decoration interior wall plastering material, which has good physicality and operability. It requires no interface treatment when used, less floor ash and high plastering efficiency. The utility model saves working hours and low overall cost of plastering, and can effectively prevent the gray layer from being hollowed, cracked and fallen off.
5: The replacement product of color steel plate, its characteristic is wide application range, can be used for the transformation and reconstruction of various workshops.
For you to briefly introduce what are the new materials for decoration and their mutual characteristics, and what are their own advantages and characteristics, I hope to help and not understand people and new For reference, if you want to know more about home improvement information, please continue to pay attention to the decoration home network.
More related wonderful reading:
Introduction of new materials for decoration and decoration, introduction to new materials for decoration and decoration
The full ceramic ball bearings listed below are supplied with rings and balls made from zirconium dioxide (ZrO2). These zirconia bearings are available as full complement (no cage) or with cages made from PTFE, PEEK or 316 stainless steel.
These are non magnetic, non-conductive and highly corrosion resistant to most chemicals although ZrO2 bearings are not recommended for prolonged contact with steam. Full complement bearings or those with a 316 stainless cage can be used up to 400°C while bearings with a PEEK or PTFE cage can cope with temperatures of up to 250°C. For temperatures below -70°C, PTFE or 316 stainless steel cages are preferred. Standard radial clearance for full ceramic bearings is C0 but other clearances can be supplied to order.
ZrO2 ceramic bearings are generally used for their extreme temperature capabilities, excellent corrosion resistance or non-magnetic properties. Other sizes can be supplied on request.
The Description of Ceramic Bearings:
Compared to steel, Ceramic ball Bearings have many specific advantages. They offer superior corrosion and heat resistance, higher dimensional stability, and lower density, which facilitate high speed. Ceramics are superior to steel in heat and corrosion resistance, and are lightweight and extremely hard as well. Consequently, ceramic rolling bearings can be used in environments where conventional steel bearings cannot. That is to say, the superiority of these bearings makes it possible that they can be applied in some special environments.
Firstly, they can be used in corrosive environments. Compared to stainless steel bearings, hybrid and all Ceramic Bearing lasted three and twenty times longer respectively. It is presumed that water readily adheres to silicon nitride and forms a better lubrication film, leading to extended bearing life.
Secondly, they can be performed in corrosive agents. Generally, silicon nitride has excellent corrosion resistance. However, corrosion resistance varies depending on the type and quantity of sintering additives, and certain corrosive agents decrease in hardness and flexural strength. In such situation, it is can be proved that the carbide-based ceramic bearings are the most effective.
Thirdly, they can be used in high-temperature vacuum. An all-silicon nitride Ball Bearing with a self-lubricating laminated cage (mainly composed of MoS2) and with MoS2-coated rings and balls proved superior in durability in a high-temperature vacuum environment. Compared with the hybrid bearings, the all-ceramic bearing was superior in both dynamic frictional torque and life.
Fourthly, they can be performed with poor lubrication. As ceramics are extremely hard and have outstanding wear resistance, they outperform other materials in bearing life without lubrication. According to a test, the steel bearing seized within a short period while the hybrid and all 627 Ceramic Bearings, though sustaining wear, did not. And the all-ceramic bearing sustained considerably less wear than the hybrid bearing, indicating that its endurance life is much longer.
Cermic Ball Bearing,Full Ceramic Bearing,Hybrid Ceramic Bearing,Self-Aligning Full Ceramic Ball Bearing
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearings.com