Copper Clad Steel grounding round wire is suitable for the general environment and the horizontal grounding body such as moisture, salt and alkali, special environment with chemical corrosion medium such as acid, soil, etc., high working ground, protective grounding, lightning protection grounding, anti-static grounding.
Features:
The principle of skin effect, its conductivity is comparable to pure copper wire, good magnetic conductivity facilitates the transmission of lightning current to diffusion. Light weight, high strength, easy installation. Take special heat treatment, can be made into a soft state, a large length, a large number of reduced linear connection point. The use of horizontal continuous casting process, metallurgy fusion casting molecules, long life.
Technical Parameters:
1, the thinnest thickness of copper layer ≥ 0.3mm
2, tensile strength ≥ 600N • mm
3, flatness error ≤ 1mm
4. The degree of copper bonding: After the adhesion test, some copper layers were peeled off except for the bite at the jaw jaws of the tiger's jaw. The remaining part of the copper and steel was well bonded and did not show any peeling.
5. Plasticity of the copper layer: When the grounding rod (line) is bent at 30 degrees, there are no cracks in the inner and outer edges of the folding angle.
Features:
The principle of skin effect, its conductivity is comparable to pure copper wire, good magnetic conductivity facilitates the transmission of lightning current to diffusion. Light weight, high strength, easy installation. Take special heat treatment, can be made into a soft state, a large length, a large number of reduced linear connection point. The use of horizontal continuous casting process, metallurgy fusion casting molecules, long life.
Technical Parameters:
1, the thinnest thickness of copper layer ≥ 0.3mm
2, tensile strength ≥ 600N • mm
3, flatness error ≤ 1mm
4. The degree of copper bonding: After the adhesion test, some copper layers were peeled off except for the bite at the jaw jaws of the tiger's jaw. The remaining part of the copper and steel was well bonded and did not show any peeling.
5. Plasticity of the copper layer: When the grounding rod (line) is bent at 30 degrees, there are no cracks in the inner and outer edges of the folding angle.
Stainless Washers,Stainless Steel Washer,Custom Stainless Steel Washers,Stainless Steel Special Washers
Taizhou Risco Stainless Steel Products Co.,Ltd , https://www.riscofastener.com