In the house decoration, if it is not done properly, it is easy to see some water leakage. However, we must know that if the leakage is too serious, it will also have a certain impact on our lives. The following small series will introduce to you how to deal with house leaks and 4 ways to teach you to solve leaking troubles.
1, the home is leaking pipe installation accuracy is the key
What to do if the water pipe connection leaks in the room, I believe that everyone will be very annoyed when it comes to this problem, and at this time it will be too busy to move around.
Reason: bad pipe installation
When the pipeline is not fixed, it may cause looseness; the position of the pipeline reserve port is incorrect, and the concrete is not poured; the leak-proof treatment is not easy to do so is the reason that the pipeline leaks easily.
Repair method: cut the pipe to make waterproof
Cut open the reserved pipe hole, perform bottom mold loading and brush cement oil, so that the old and new cement mortar can be joined; pour the concrete with a high grade marking, and apply a waterproof coating around the dry pipe mouth. It may be appropriate to do a waterproof treatment around the dried pipe and wait until 24 hours after the seepage test. If there is no problem then you can restore the wall.
2, housing leakage, protective layer to redo
The waterproof layer is a layer of material designed to prevent rain from entering the roof and groundwater seeping into the walls, basement and underground structures so that indoor water seeps into floors and walls. Once leakage occurs, it will also have a great impact on life.
Cause: Damage to the waterproof layer
Man-made construction damage will also lead to leakage of the waterproof layer; destruction of the pipeline installation and damage caused by the construction of the protective layer or the waterproof layer; this time there may be quality of the waterproof material itself will also be some problems.
Repair method: shovel out redo waterproof
First of all, immediately after the leak point is found, all the wall and floor protection layers are shoveled out and the waterproof treatment is performed again. After the completion of the rework, after 24 hours, do a water seepage test and fix it if there are no problems.
3, wall floor is now looking for leaks on the black zebra
Many people have finished their renovations, and soon after they move in, they find that there are dark spots on the wet walls, or water leakage on the top and walls. This is especially true if some winter walls are wet or even moldy. This phenomenon not only affects the appearance but also brings a lot of inconvenience to our life.
Cause: Not fully consolidated
The construction staff did not follow the construction requirements and specifications; it may be that you did not sufficiently level the concrete when pouring the floor slabs. This made it easy for some empty drums, honeycombs, pockmarks and other quality problems; it may also be cement and There is a quality problem in itself.
Repair method: seep leaks to redo
Once leaks are found, leaks must be found at this time. Find the leak point so that you can shovel away the protective layer on your wall or ground leak. Then fix it according to the specification so that it can be re-waterproofed and then restored.
4, to prevent leakage of cracks to do a good job of conservation work
Crack leakage is also one of the high-problem problems. Repairing and repairing will mostly damage the decoration. It will be relatively troublesome. The upper and lower layers of water leakage will often cause disputes and conflicts between owners, tenants and property companies. Therefore, it must be handled properly. .
Cause: Concrete temperature is not controlled
There is no good control of temperature when pouring concrete, and it may also be that your maintenance is not in place; the ratio and structure of steel reinforcements are caused by the heavy loads on the roof of the building; there are no settlement joints according to design and specifications. Will be in expansion joints, after pouring belt construction.
Repair method: clean up
First of all, clean up the defects of the joints, then you can follow the requirements of the construction specifications, and then use the high-grade markings to repair. It may also be considered to repair cracks with high pressure grouting.
Summary: How to deal with house leaks and 4 ways to teach you to solve the leaking troubles related to the introduction to this, the above describes these kinds of leak problems are also more often occur, so be sure to find out the reason before dealing with leaking houses , so that To find the right way to deal with.
Switchable Smart Film Glass Multiple Control Power Supply it could separate control several panels power on and power off.
Smart Film Multiple Control Power Supply, Smart Glass Multiple Control Power Supply
Shenzhen YuGuang New Material Co.,Ltd , https://www.ygsmartfilm.com