Shielded pump centrifugal centrifugal pump, pump and drive motor are enclosed in a pumped medium filled pressure vessel, the pressure vessel is only static seal. This construction eliminates the need for rotary shaft seals in conventional centrifugal pumps to be completely leak-free. Shield pump pump and motor together, the motor rotor and pump impeller fixed on the same axis, the shield sleeve motor will be separated from the stator and rotor, the rotor is transported medium, the power through the stator magnetic field Pass to the rotor. Its main advantages: â‘ compared with a sealed pump, eliminating the need for maintenance and replacement of the seal of the trouble, but also eliminates the coupling, a small number of parts (mechanical seal pump only about 30%), high reliability. No rolling bearings and motor fan, do not need to add lubricating oil, and smooth operation, low noise. Configurable bearing wear monitor to detect bearing wear. â‘¡ compact structure, small footprint, low requirements of the base and the base, there is no coupling of the problem, easy to install and low cost. Routine maintenance workload, low maintenance costs. â‘¢ In the vacuum system or "vacuum" and "positive pressure" alternating operation of the normal operation without leakage. The material can be fed directly from the vacuum tank to other vessels under high vacuum conditions. Wide range of use, for high temperature, high pressure, low temperature, high melting point and other conditions can meet the requirements. The main drawbacks: â‘ due to the use of sliding bearings, and with the media being transported lubrication, so the poor lubrication of the media is not suitable for shielded pump delivery. Generally suitable for shielding pump medium viscosity range of 0.1 ~ 20cP. â‘¡ shielded pump efficiency is usually lower than a sealed centrifugal pump. However, in the case of medium and low power, compared with the double-end seal pump, the latter has little difference in overall efficiency due to the increased power consumption of the cooling and flushing systems. â‘¢ centrifugal pump operation, the required flow should be higher than the minimum continuous flow. This is especially important for shielded pumps because at lower flow rates, the pump is less efficient and can cause heat to evaporate and cause the pump to dry and cause damage to the plain bearings.
Manhole Cover,Ductile Manhole Cover, Ductile Sewer Manhole Cover, Ductile Iron Sewer Manhole Cover, Sewer Manhole Cover Ductile Iron
Runchun Casting (Zhoushan) Co., Ltd. , https://www.en124casting.com