Spring decoration precautions carefully store to prevent wood deformation

The dry, windy spring is a period of frequent fires. Therefore, experts in the industry have warned consumers who are renovating that they must prepare for fire prevention, anti-virus, and anti-deformation materials in advance for safety decoration and good decoration results.


Jumei Indian Home Furnishing Museum      Meihao Home Accessories Museum  

First, pay attention to fire prevention, equipped with fire fighting equipment, use safety materials

First of all, the spring decoration must pay attention to the fire safety during construction. Pay attention to electricity safety, can't unwieldy connect the wires, the power line can not be without protection tube; on-site smoking is prohibited, can not use an open flame; paint, thinner and other flammable materials should be stored away from the fire source, cool, ventilated, safe Local; The construction site shall be cleaned every day to remove wood chips, paint scales, residues, etc. Combustibles; to ensure safe and smooth indoor exits; if necessary, equipped with fire-fighting equipment.

Followed by the use of fireproof materials in the decoration, in accordance with national standards, must meet the standard of decorative materials.

Non-combustible materials should be used for interior ceilings, and non-combustible or non-combustible materials should be used on walls, floors and ground floor to minimize the risk of fire.

Ceiling keels, cabinets and other wood materials to do fire prevention.

In addition, all electrical circuits should be put through the casing, junction boxes, switches, lamps, ceiling lamps and heat-generating devices around the application of non-combustible materials for fire protection; do not just look at the appearance of the room lighting, but also carefully check Whether it is safe, should choose a luminaire that meets 3C certification in a reliable market.

Second, ensure ventilation, reduce paint coating volatiles, beware of explosion

Paints, coatings, and thinners that are used in large amounts in decoration are easy to evaporate. If the indoor ventilation is poor, the volatile gases from the paint will not be easily discharged and they will accumulate in the room.

The volatilized gas and air are mixed to form an explosive mixed gas. It is easy to explode when exposed to an open flame. When reaching its explosion limit, little attention is paid. When a light switch is turned on or an electric tool is turned on, the generated spark can bring serious problems. as a result of.

The main components of paints and waterproof materials are mostly resinous organic polymer compounds, which contain a large amount of volatile solvents. When used, it is often necessary to use thinner to adjust viscosity for construction. These thinners are highly volatile and diffuse in the air, making them the culprit in worker poisoning during construction. Therefore, decorators must wear protective equipment when using paint in a closed environment. Painters should not stay overnight at the job site.

Third, do not choose damp wood, carefully stored to prevent deformation

When buying wood, you must go to a large wholesaler and not a street shop. Because the wood of the large wholesalers is generally dried in the production area and then transported in containers, the wholesalers directly pick up the goods from the containers and then transport them to the homes of the decoration owners, which reduces the chance of wood dampening. If you are not sure, you may want to use a hygrometer to check the humidity of the wood at the time of purchase. It should be reminded that after the timber is bought back, it should be put in the house for two or three days, and it should be constructed after being adapted to the gas phase. Before construction, the ground should be kept dry and covered with a moisture barrier. In this way, the wood will basically no longer have the problem of deformation.

Fourth, buy tiles also see the moisture content, to prevent the emergence of cracked pottery

There are many kinds of tiles, and you should pay attention to its moisture content during spring purchase. The surface is smooth and smooth, shiny and shiny, and the soft touch is a product with good moisture content. At the same time pay special attention to the difference between pottery and porcelain, water absorption is small, compact structure, percussion sound crisp and clear is the porcelain brick, and high water absorption, structural holes, boring sound is boring brick. Porcelain tiles with low water absorption are not prone to cracks when the temperature difference between day and night changes in the spring.

Fifth, shop floor to stay a good expansion joints carefully

When installing parquet, be sure to ask the installer to leave enough expansion joints so that when the summer comes, the floor will not lift. At the same time pay attention to keep the room air dry. In hot springs, the paint dries slowly after the paint is applied. After the paint absorbs moisture in the air, it will produce a layer of matte. Therefore, it is generally necessary to use a driers to make the paint dry quickly. Similarly, latex paint is not easy to dry, it will not become moldy, it will need to open the air conditioner after construction to dehumidify, completely remove the moisture in the air.

Six, to prevent cracking paint, first deal with the insulation layer, improve the base and then brushing

At present, in many new houses, there is a new insulation wall with inner insulation. This type of interior thermal insulation wall in the decoration, it is prone to latex paint cracking problems. In fact, this cracking is caused by cracks in the wall's cement, or the cracking of the wall's "insulation board" joints, not the quality of the decoration. However, in order to pursue a better decorative effect, the decoration company's technical staff came up with many ways to deal with the insulation wall cracks, you can choose according to their own actual situation and decoration budget: one is to clean the wall surface after the first A layer of really good cloth is applied on the wall, and the tension of the fiber is used to ensure the integrity of the latex paint film. The other is the use of flexible decorative materials for the surface treatment of the wall, such as some special putty can make up for the wall cracks to a certain extent. Good quality latex paint can also play a role in covering the surface of small cracks. In addition, some consumers simply remove the wall insulation. Although this method can be used once and for all, it will reduce the insulation and thermal insulation properties of the wall, so it is not recommended.

Seven, four distinct seasons, minor troubles, to be prepared for the warranty

After the influence of external factors such as the moisture content in the air and changes in the temperature of hot and cold air throughout the year, minor problems such as paint peeling and wall cracks appearing in the decoration will gradually appear. Some experts believe that these “small problems” are so distinct in Beijing. It is difficult to avoid places with heating season. Therefore, it is particularly important to choose a formal decoration company that has a good reputation and can provide after-sales warranty service.

Consumers must first listen to the decoration party's plans for waterproofing and dampness, and sign a warranty contract with the decoration party so that you can negotiate with the decoration party about the decoration problems exposed by the seasonal changes.

Notices Three trees paint entrance decoration paint decoration interior decoration latex paint interior decoration budget new house decoration budget floor tile tile adhesive home decoration floor tile decoration home ld tile

Huahui activated carbon can be divided into pellet carbon, granular carbon, impregnated carbon , acid washed carbon, powder carbon and briquette carbon etc, more than 6 kinds and hundreds of specifications. 

 Impregnated carbon is Huahui Company's fifth major series of products. 

Huahui can produce impregnated carbon, such as impregnated KOH.NaOH.CUO.FE2O3.SILVER.SULPHUR ,KI,KBR,H3PO4,H2SO4,KMNO4, Chrome 3%+CU 7%and so on or as clients requirements. 

With processing multiple impregnation process according to the characteristics of different drugs, this kind of carbon can meet the diverse needs of customers.

Active Carbon

CUO Impregnated Pellet Carbon

CUO Impregnated Pellet Carbon,Impregnated CUO Coal Based Carbon,Pellet Carbon With CUO

Ningxia Huahui Activated Carbon Company Limited , http://www.huahurcarbon-tr.com