Home decoration is one thing that many people attach great importance to. The decoration is their own home, their place of residence, the decoration of the exterior can be completely displayed by our arrangement, but few people know about the decoration materials. Less, the following introduces the common sense of buying water pipes for home decoration.
1. Home decoration hoses generally use PPR pipes, steel pipes, and copper pipes. The prices of steel and plastic pipes are relatively higher, while the prices of PPR pipes are higher than those of steel pipe fittings. The price of copper pipe is the most expensive, and the price is equivalent to PPR pipe. About 4 times.
2, home decoration Laying pipes should be avoided from the ground on the shop, preferably from the top or the wall line, the amount of pipe may be slightly increased, but it is conducive to future pipeline maintenance.
3, cold and hot water pipe wall thickness is not the same, cold water pipe can not be used as hot water pipe, hot and cold water pipes is a simple way to distinguish the hot water pipe is marked with a red line.
4. The standard length of PPR pipe is four meters each. When buying, it is necessary to ask whether the price of each pipe is the price of each pipe or the price of pipe per meter. After the pipe is delivered, it is necessary to remember whether the length of the pipe meets the requirements.
5, home decoration hose should pay attention to the pipe diameter and wall thickness, the general manager to use 6 in charge of the branch can choose to use 4 in charge, in order to ensure the amount of water, in charge of 6 can also be used in charge of.
6, home improvement When buying pipes, pay attention to whether the pipe diameter is symmetrical or not, and the uneven thickness of the pipe diameter will affect the docking of the two interfaces.
7. The Quality Standard for Home Furnishing Decoration Works of the Building Decoration Industry Association has such a stipulation on the time and pressure of pressure test: Newly installed water supply pipelines must be subjected to pressurization tests in accordance with relevant regulations. The test pressure of metal and its composite pipe is 0.6MPa, and it is regulated for 10 minutes. The pressure drop in the pipe should be no more than 0.02MPa without leakage; the test pressure of plastic pipe is 0.8MPa, and the pressure in the pipe is 20 minutes. The pressure drop in the pipe should not be greater than 0. .05MPa, no leakage.
Hydropower renovation decoration materials knowledge home furnishing decoration decoration home
Water Filtration,Wastewater Treatment,Granular Activated Carbon
Coal-Based Activated Carbon,Activated Carbon Co., Ltd. , http://www.nbactivatedcarbon.com