Teach you how to buy tiles required course

Posted on

1: Selection of floor tiles to distinguish the space in the choice of floor tiles, in the material should be different. Tiles are divided into polished tiles and glazed tiles. Polished tiles are also known as vitrified tiles. They are characterized by good abrasion resistance and do not require water soaking. They are relatively smooth and beautiful, so they are better to use in the living room and dining room, and relatively speaking, Easy to wipe. Glazed tile is also called mirror tile, which is characterized by good anti-skid property. The better the anti-slip effect, the more attention should be paid to the fact that the glazed tile is more sensitive to dust, which weakens the anti-slip effect. The kitchen and bathroom are easy to use because they are easily wet. Bricks.

2: It is essential to understand the parameters

The hardness of the tile is the most important parameter and will directly affect the service life of the tile, which is especially important. The simplest method is to use the method of tapping and listening. The sound is crisp and clear to show that the inner quality is good and it is not easy to deform and break; the color difference and size are judged intuitively. Look at whether the colors of a batch of tiles are generally the same and can be compared. Well put together, small color, regular size is top grade.
Of course, the identification of technical performance can not only rely on feelings, but also must see the manufacturer's certification, in general, the technical standards of the products are all certificates issued by the state.
There is also an important parameter is the degree of wear, according to the low to high total is divided into five degrees, five degrees are super wear resistance, generally not for home decoration, home improvement brick can be selected from one degree to four degrees. The water absorption rate also determines the use of tiles. Tiles with high water absorption rate have low density and brick holes are sparse. They should not be used in places with frequent activities, so as to avoid cleaning after absorbing water and dirt. Tiles with low water absorption rate are highly dense and have very high water content. High moisture and dirt resistance.

3: Paving is particularly important before paving. Tiles often need to be soaked in fresh water for 20-30 minutes. Only after the water is filtered can the paving be done. Otherwise, it will be easy for the tiles to evaporate. Before use, check whether the color number and size marked on the outer packaging are the ones you ordered. Whether the bricks with the same color number have defects such as chromatic aberration or broken wire. Only use the same color number to make the color uniform. The cement label used for paving should be low-grade, cement thickness should not be too large, generally not more than 5mm. Acceptance should pay attention to the ceramic tile must be solid, no hollowing, no cracks, no skew, missing edges and other defects.

4: Tiles can not be purchased cheaper and some small manufacturers rely on lower production costs to fight crazy price war. Little did they know that the tiles would be used for many years. They saved time and bought tiles that were not worn by small factories. After one year, the brick surface was cracked, cracked, and unsightly. Spend money to re-paving bricks, once paved all kinds of electricity, gas pipeline can not be easily moved; secondly, the second decoration of the chaos and stir the whole family unrest. The most frightening thing is that some small manufacturers do not have environmental protection because they are able to reduce costs. Therefore, it is recommended that consumers choose tiles from regular manufacturers.

Tiles Tiles Cement Space Home Decor Home Decorations Living Room Bathroom Tiles Color Bathroom Tiles Bathroom Floor Tiles Bathroom Size Tiles Price Kitchen Tiles

ANSI B16.9 / B16.28 Hastelloy Pipe Fittings, Hastelloy C276 Seamless & Welded Pipe Fittings, Hastelloy UNS N10276, N06022, N10665 Butt weld Fittings, Elbow, Tee, Reducer, Bends, Hastelloy C22, B2 Pipe Caps, Cross  
Hastelloy Butt weld Pipe Fittings Specification:
Grade : Hastelloy C276 (UNS N10276), Hastelloy C22 (UNS N06022), Hastelloy B2 (UNS N10665), Hastelloy C-4 (UNS N06455)
Standard : ASTM B366 / ASME SB366
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43
Size : Seamless 1/2″ – 10″, Welded 1/2″ – 48″
Form : Elbow, Long Radius Elbow, Short Radius Elbow, 90 Deg Elbow, 45 Deg Elbow, 180 Deg Elbows, 1D Elbow, 3D Elbow, 5D Elbow, Tee, Equal Tee, Unequal/Reducing Tee, Reducer, Concentric and Eccentric Reducer, End Cap / Pipe Cap, Stubend, Long & Short Stubend, Swage Nipple, Barrel Nipple, Reducing Nipple, Bend, Long Radius Bends, Piggable Bend, Equal & Unequal Cross.

Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS

Standard

Hastelloy C276

Hastelloy C22

Hastelloy B2

UNS

N10276

N06022

N10665

WERKSTOFF NR.

2.4819

2.4602

2.4617

AFNOR

–

–

–

JIS

NW 0276

NW 6022

–

GOST

ХН65МВУ

–

–

OR

ЭП760

–

–

EN

NiMo16Cr15W

NiCr21Mo14W

–


Hastelloy Fittings

Hastelloy Fittings,Hastelloy Tube Fittings,Hastelloy Pipe Fittings,Hastelloy Fitting

Zhejiang Max Stainless Steel Co.,Ltd , http://www.cnstainlesstube.com